AIRDROID FAILED TO CONNECT TO SERVER ANDROID
AIRDROID FAILED TO CONNECT TO SERVER PRO

Try adding the DNS directive to your interface section on the client (e.g.: DNS=8.8.8.8 or your local DNS server).Īlso I take it you're using 0.0.0.0/0 as AllowedIPs on the client? This may be causing a routing loop where it's trying to route local traffic through the tunnel, which also may be blocked by the firewall on your opnsense box. Does the problem persist if you use the internal ip (10.0.something) as endpoint instead of the public ip?Ĭould also be a DNS problem where it's trying to access your internal DNS server through the tunnel, which gets blocked by the firewall.

AIRDROID FAILED TO CONNECT TO SERVER ANDROID

Now I can leave wireguard on 24/7 on android & Windows10 without needing to worry about forgetting to turn it off/on. This DNS entry overrides my public DNS entry and therefore I can use the same DNS entry for both public and private connection. What i ended up doing was creating a DNS entry in pi-hole that points to there. TL DR: Wireguard works perfectly normally while travelling, if i am at home WiFi/LAN and wireguard is still enabled, the connection/tunnel is broken and no longer works.įIXED: If I point my wireguard connection to OPNSense/DHCP-server/wireguard-server everything works fine. only enable wireguard when WiFi network is not my home network Is there a way to make my android client always connected to my local LAN? I don't want to manually enable/disable wireguard client everytime i leave my house. Android client does not seem to have support for this.

AIRDROID FAILED TO CONNECT TO SERVER PRO

My question is how do i resolve this? On my macbook pro the Wireguard client can be configured to only startup when my WiFi network name changes to something other then a pre-approved one. My guess is it has something to do with that fact that I am on my local network and trying to loop through the internet to create a VPN/wireguard connection to my local network. When i connect to my home WiFi network where wireguard+OPNSense is running i lose access to the internet. I am able to connect my android device to it using the official client. If you encounter other problems, please check these post to see if it helps.So I have wireguard server setup and running on my OPNSense box. AirDroid will restore the connection automatically when the computer connects to network again. If you're using AirDroid Win/Mac, the connection will be interrupted when the computer goes sleep.

You may connect your device to WiFi network and try again.Ģ. Thus the connection between your device and PC/laptop will be interrupted. If you have connected your device to 2G/3G/4G network, the network will be disconnected when you receive an inbond-call. Power saving mode causes disconnected of AirDroidįailed to connect to AirDroid after restartġ. If you do know the reason, follow the link(s) below, you can find the settings according to your need.ĭisconnection caused by Doze mode (esp. - If you don't know why, we have a diagnose team to do it for you, check it out here. If it fails again, you can try Lite mode if your device and computer are on the same Wi-Fi network and the IP address shown in AirDroid on your device. So, restart Airdroid on your device and connect it again.Ĥ. Make sure that Airdroid is keeping running on the background, because sometimes it will killed by the phone's process.

Don't lock your device when you are connecting and wake it up.ģ. When you connection failed, you can follow the troubleshooting guides to see if it works.Ģ. There might be some expected interruptions such as unstable connection or sign in failure during/after this period.

Airdroid failed to connect to server